User guide

DETEXI NVR 64 - 169
Configure Sequence of Cameras
Sequence can be considered as a virtual IP-device video input that consists of sequence of multiple video
inputs with configurable order and execution. Any sequence is created by compiling IP-devices’ video
inputs configured within the DETEXI NVR into a series of positions. Each position can contain one or more
video inputs, splitting the screen if necessary to show all chosen video streams at once. Sequence can be
used in any way that a normal IP-device can —
• Sequences will show in the Cameras List for selection like a normal camera/ video server.
• Sequences can be viewed in the Live View (Single or Multi-camera).
• Sequence can be used as a carousel feature with the 1+5 or 1+11 multi-camera view, with
the sequence in the hot spot cycling through the rest of the cameras organized around the
large spot.
1. Add New Sequence
1. In the NVR Control Center switch to the Cameras (Fig 39).
2. Below the Cameras List make sure that Sequence is chosen as add type from the drop-down
list next to the Add button, then click Add button to open a blank Cameras Settings dialog.
Fig 39. NVR Control Center — Cameras — Cameras Settings
(Add a New Sequence.)