User guide

DETEXI NVR 65 - 169
2. Name Sequence, Add Position
1. In the Cameras Settings enter the sequence Name (Fig 40).
2. Check Repeat checkbox to loop the sequence. Leave time(s) as 0 for the sequence to loop
infinitely. You may also want to define with FPS for the video streams to be displayed at.
3. Right-click in the white box and choose Add Position to add the first position in the sequence.
Define a Dwell time, as how long this position will be displayed before moving on to the next.
Fig 40. NVR Control Center — Cameras — Cameras Settings
(Name, Add a New Position.)
3. Define Cameras
3. Right-click on the position item and choose Add Camera to add a video stream to the sequence
position (Fig 41).
4. Choose a desired camera from the list, and define image quality.
9 If the camera is PTZ, you may define PTZ coordinates to move the camera to when it
loads.
9 If you would like to choose a predefined preset, click the Connect button to the right to
populate the preset list. This would also bring live video in from the camera. .