User guide

DETEXI NVR 68 - 169
Fig 43. NVR Control Center — Users — User Information
(Assign Permissions.)
9 Be sure that User Rights (Adm/Oper/User) settings make sense considering
the authentication settings in the Security & Alarm.
9 The User Rights chosen for the first sequence configured will automatically be
assigned to each camera after that unless manually changed.
9 PTZ permission is defined on a per-camera basis, and is enabled by default if the
camera has PTZ capabilities when assigned to the user.
Enable Recording
Before setting up any type of recording ensure first that recording is enabled for the selected camera. After
the camera was generally defined in the NVR it has recording enabled by default — the Exclude from
recording checkbox is unchecked.
• Turning on recording requires at least one schedule to be added and configured for the
camera; type of recording, and motion settings (if appropriate) defined.
• To optimize performance disable recording for the cameras that are not intended for recording.
Thus the Recorder will ignore those cameras completely, freeing resources for other tasks.