User guide

DETEXI NVR 78 - 169
9 If Connect camera immediately checkbox in the NVR Control Center — General is
checked the connection will be established immediately and the Connect/Stop toggle-
button will not be available.
9 This connection is temporary and allows the camera’s settings to be configured and
checked.
9 A PTZ camera preset positions are only available if the connection is established.
9 Show Locally checkbox can be checked to connect to the camera using local IP address
and port number (during configuration time only). The checkbox is only activated if camera
has both an internal and external connections configured in the NVR Control Center —
Cameras — Cameras Settings.
2. Under the Image and Position Setup enter Pan, Tilt, Zoom parameters or select a preset
position from Preset drop-down list.
9 Getting PTZ values of the current camera position click on the Get PTZ button.
Setup Recording with Motion Detection
Recording with Motion Detection — video is recorded constantly while on schedule. The video is
analyzed and encoded with markers when motion is detected for faster and smarter replay.
Fig 50. NVR Control Center — Cameras — Recording — Schedule
(Recording with Motion Detection.)