User guide

DETEXI NVR 81 - 169
Fig 52. NVR Control Center — Cameras — Recording — Schedule — Alarm
(Setup Recording on Input Alarm.)
1. With a selected camera schedule switch to the Alarm tab below the schedule list (Fig 52).
2. Select Input Ports from the Alarm on drop-down list.
9 The on Events selection is for intelligent IVAS cameras only.
3. Select an appropriate predefined task from the Execute task drop-down list below.
9 Recording of alarm video occurs if only an assigned task includes the Record
Camera action that initiates a video stream from the camera.
4. Enter a quantity of Post Alarm recording frames.
5. Click Save button below the Schedule list to save settings.
9 If Recording on Input Alarm method is setup, the IP device inputs must be defined
in the cameras settings for the NVR to be aware of external devices connected to
the inputs and the Check Alarm service responsible for watching the status of IP
device inputs should be running and monitored. (Pre-Alarm + Post-Alarm
number of frames specified).