User guide

DETEXI NVR 89 - 169
File Filtering
1. In the NVR Control Center go to the General — FTP Server during normal operation the Do not
Filter Files checkbox must be unchecked (Fig 58).
9 In this case, when the images are uploaded and saved in the Root Directory subfolders the
NVR immediately filters those files to determine weather they belong in the NVR Archive based
on their file names. If any file name does not make sense to the NVR, the file will be thrown out
rather than integrated into the archive.
9 The IP device FTP Client should be setup for proper file naming. The file names must be of the
correct format, which the NVR understands.
9 File filtering can be temporarily disabled, allowing you to ensure that files are being uploaded to
the NVR FTP Server properly.
2. To temporarily disable file filtering check the Do not Filter Files checkbox.
9 Be sure to turn the file filtering back on, or images will not be recorded to the NVR Archive.
Fig 58. NVR Control Center — Genera — FTP Server
(File Filtering.)