User guide

DETEXI NVR 90 - 169
4. Setup Action on FTP Alarm
In some wireless configurations, and other environments where constant streaming is not possible, video
can be uploaded via FTP based on decision making within the IP-device. When video is uploaded to the
DETEXI NVR FTP Server, the video is merged into the archive as alarm video, and the FTP Alarm event
is raised. To setup an action to be executed on the FTP Alarm a previously created task should be
assigned to the event.
1. In the NVR Control Center — Cameras select a camera to configure from the Cameras List and
switch to the Security & Alarm (Fig 59).
2. Under the Actions on Alarm select an appropriate predefined task from the FTP Alarm Task drop-
down list.
3. Click Save button below the Cameras List to save settings.
Fig 59. NVR Control Center — Cameras— Security & Alarm
(Setup Action on FTP Alarm.)
9 Each individual event can only have one task assigned to it.
9 Any task can include one or more actions/notifications, allowing for multiple
things to happen when a single alarm or event is raised.
9 An event can also have a composite task assigned to it. Any composite task
consists of several predefined tasks of the user’s choice.