Operation Manual

1
18 Caravan - 11-06 - DET-0030-05E
N
Appliances
1
0
Open drain cocks (Fig. 127). To do this, set the rocking levers (Fig. 127,1)
in a vertical position. The boiler is drained to the outside using the drain
cocks.
Check whether the water has been drained completely from the boiler
(approx. 12.5 litres).
10.4.4 Reich boiler
The boiler is operated with 240 V. The boiler heats about 5 l of water. The
water temperature can be set on the temperature controller (Fig. 128,1) of the
boiler. The water in the boiler can be heated up to a maximum of 80 °C.
Switching on:
Connect the vehicle to the external 240 V power supply and switch on the
240 V automatic circuit breaker.
Set the desired temperature on the temperature controller (Fig. 128,1). The
indicator lamp (Fig. 128,2) is illuminated during the heating up period.
Switching off:
Turn the temperature controller (Fig. 128,1) in an anticlockwise direction to
the "I" position.
Switching on frost
protection:
Turn the temperature controller to the "F" position.
Filling the boiler with water:
Connect the vehicle to the external 240 V power supply and switch on the
240 V automatic circuit breaker.
Set the desired temperature on the temperature controller (Fig. 128,1).
Set all the water taps to "Hot" and open them. The water pump is turned
on. The warm water pipes are filled with water.
Keep the taps open until the water flowing out of the taps has no bubbles
in it. This is the only way to ensure that the boiler is full of water.
Close all water taps.
Emptying the boiler:
Turn the temperature controller (Fig. 128,1) in an anticlockwise direction to
the "I" position.
Open all water taps and set to the central position.
Open the water drainage on the pressure relief valve (Fig. 128,4). To do
this turn the red knob (Fig. 128,3) in an anticlockwise direction.
Check whether the water is completely drained from the boiler.
Further information can be obtained from the separate instruction manual
"Alde Compact".
Fig. 128 Reich boiler