Operation Manual

13
5M
otorcaravan - 09-08 - DET-0033-07EN
Electrical system
9
An intact 12 V fuse can be detected by the unbroken fuse element
(Fig. 141,1). If the fuse element is broken (Fig. 141,2), change the fuse.
Before changing fuses, take the function, value and colour of the relevant
fuses from the following specifications. When changing fuses, only use flat
fuses with the values shown below.
Fuses for the starter
battery
The fuses are located near the starter battery or near the transformer/rectifier.
For vehicles on a Fiat chassis, the fuses are installed near the transformer/rec-
tifier in the console of the driver's seat.
For vehicles built on a Ford chassis, the fuses are installed near the trans-
former/rectifier.
Fig. 141 12 V fuse
1 Unbroken fuse element
2 Broken fuse element
Fig. 142 Fuses for the starter battery
(Fiat)
1 Jumbo flat fuse 40 A/orange
2 Flat fuse for optional devices
3 Flat fuse 5 A/beige
(for the right clearance light)
4 Flat fuse 5 A/beige
(for the left right clearance)
5 Flat fuse 2 A/grey
(for alternator D+)
6 Jumbo flat fuse 20 A/yellow
(for charging line)
Fig. 143 Fuses in front of the driver's
seat (Ford)
1 Jumbo flat fuse 40 A/orange
(for starter battery)
2 Jumbo flat fuse 20 A/yellow
(for charging line of the starter bat-
tery)
3 Jumbo flat fuse 40 A/orange
(for living area battery)
4 Flat fuse 2 A/grey
(for battery charger sensor)
5 Jumbo flat fuse 20 A/yellow
(for the refrigerator)