Operation Manual

2
22 Motorcaravan - 09-08 - DET-0033-07E
N
Maintenance
1
3
13.6.8 Recessed halogen light (flat)
The recessed halogen light (Fig. 254,1) is installed flush.
Changing bulbs:
Use a screwdriver to remove the inner cover ring (Fig. 255,1) from the
housing.
Use a screwdriver to remove the cover ring with the glass (Fig. 255,2) from
the lower section of the recessed halogen light.
Remove halogen bulb (Fig. 255,3).
Put in a new halogen bulb.
Reassemble the lamp in the reverse order.
13.6.9 Surface-mounted halogen light driver's cabin (model I)
Changing bulbs: Use a suitable tool (e.g. a screwdriver) to carefully lever out and remove
the glass cover (Fig. 256,1).
Remove halogen bulb.
Put in a new halogen bulb.
Reassemble the lamp in the reverse order.
Fig. 254 Recessed halogen light (flat) Fig. 255 Changing the halogen bulb
Fig. 256 Surface-mounted halogen light
driver's cabin (model I)