Operation Manual

Appliances
10
129Caravan - 12-10 - EN
Refrigerating temperature
control
When turned on the first time the refrigerator automatically selects the middle
thermostat position. This setting can be adjusted manually using the control knob
(Fig. 137,4). The indicator lamps (Fig. 137,3) show the selected thermostat position.
The refrigerating temperature for the three types of energy is set with the control
knob. It takes a few hours till the refrigerator reaches its normal operating tempe-
rature. When changing over the operating mode the thermostat setting will be
maintained. The refrigerating temperature is retained regardless of the type of
power being used.
Manual operation
Switching on:
 Open the regulator tap on the gas bottle and the gas isolator tap "Refrigerator".
 Select the energy type with the energy selector switch (Fig. 137,1). The respec-
tive indicator lamp (Fig. 137,2) lights up green.
 Adjust the refrigerating temperature with the control knob (Fig. 137,4). The
indicator lamps (Fig. 137,3) show the selected thermostat position.
When the gas operation is faulty, the "GAS" indicator lamp (Fig. 137,2) flashes red.
When operated with 12 V, the refrigerator draws power only from the starter bat-
tery.
Switching off:
 Turn the energy selector switch (Fig. 137,1) to " ". No indicator lamp
(Fig. 137,2) is lit.
 Close the gas isolator tap "Refrigerator" and the regulator tap on the gas bottle.
Z When the refrigerator is set manually to "12 V", it constantly uses current. There-
fore, switch over to gas operation if the vehicle engine is off and the vehicle is
not connected to the 230 V power supply.
Z Further information can be obtained from the separate instruction manual "Ref-
rigerator".