Installation Instructions
Table Of Contents
- TABLE OF CONTENTS
- List of Figures
- 1 USERS OF THIS MANUAL
- 1.1. Purpose of this manual
- 1.2. End User
- 1.3. Training
- 1.4. Information
- 2 BlastWeb SYSTEM PRODUCT SAFETY
- 2.1. DetNet Safety Philosophy
- 2.2. User Safety
- 2.3. Transportation, Storage and Handling
- 2.4. Maintenance Schedule
- 2.5. Information in case of emergency
- 2.6. RF Repeater General Safety Warnings
- 2.7. Warning, Caution, and Note Statements
- 2.8. RF compliance - FCC (USA) and ICES (Canada)
- 2.9. DISCLAIMER
- 3 RF Repeater
- 3.1. Components
- 4 Installing RF Repeater
- 4.1. Mounting RF Repeater
- 4.2. Connecting Antennae
- 4.3. Backup Battery
- 4.4. Main Power
- 5 Solar Panel (Optional)
- 5.1. Mounting Solar panel to bracket
- 5.2. Connecting arm
- 5.3. Securing arm to a fixed pole
- 5.4. Adjusting Solar panel
- 6 Channel Setup
- 7 Troubleshooting
- 7.1. Replace main supply cable
- 7.2. Low Battery
- 7.3. PSU Card and RF Repeater Cards
UTM-00233 | Rev 3
Page 11 of 20 DetNet South Africa Copyright © 2019
Figure 4: Installed Repeater
Mount the RF Repeater unit on a 75-100mm diameter pole
Secure the unit to the pole using the pole clamps and mounting plates with M8 nuts, washers and spring
washers, using a 13mm spanner.
Ensure that no metal objects are in line of sight of both the Bench Box(es) and the Base Station which
may cause interference with the signal.