Installation Instructions
Table Of Contents
- TABLE OF CONTENTS
- List of Figures
- 1 USERS OF THIS MANUAL
- 1.1. Purpose of this manual
- 1.2. End User
- 1.3. Training
- 1.4. Information
- 2 BlastWeb SYSTEM PRODUCT SAFETY
- 2.1. DetNet Safety Philosophy
- 2.2. User Safety
- 2.3. Transportation, Storage and Handling
- 2.4. Maintenance Schedule
- 2.5. Information in case of emergency
- 2.6. RF Repeater General Safety Warnings
- 2.7. Warning, Caution, and Note Statements
- 2.8. RF compliance - FCC (USA) and ICES (Canada)
- 2.9. DISCLAIMER
- 3 RF Repeater
- 3.1. Components
- 4 Installing RF Repeater
- 4.1. Mounting RF Repeater
- 4.2. Connecting Antennae
- 4.3. Backup Battery
- 4.4. Main Power
- 5 Solar Panel (Optional)
- 5.1. Mounting Solar panel to bracket
- 5.2. Connecting arm
- 5.3. Securing arm to a fixed pole
- 5.4. Adjusting Solar panel
- 6 Channel Setup
- 7 Troubleshooting
- 7.1. Replace main supply cable
- 7.2. Low Battery
- 7.3. PSU Card and RF Repeater Cards
UTM-00233 | Rev 3
Page 16 of 20 DetNet South Africa Copyright © 2019
Loosen the two nuts on pole clamp
Open the pole clamp and insert the arm between the pole clamps
Secure and tighten the pole clamps
Loosen the two nuts on the pole clamp
Clamp around a 75-100mm diameter pole
Secure and tighten pole clamps