Specifications
Table Of Contents
- 1. USERS OF THIS MANUAL
- 2. SYSTEM PRODUCT SAFETY
- 3. Warning, Caution, and Note Statements
- 4. DigiShot® Plus Base Station
- 4.1. Components
- 5. Base Station Accessories
- 5.1. RF Antennae
- 6. Setup and Configuring DigiShot® Plus Base Station
- 6.1. Charging the DigiShot® Plus Base Station
- 6.2. Battery Errors
- 6.3. Power Base Station On
- 6.4. Power OFF DigiShot® Plus Base Station
- 6.5. Menu Navigation
- 7. System Settings
- 1. Display Remote Status Screen
- 1. Display Remote Status Screen
- 1. Display Remote Status Screen
- 1. Display Remote Status Screen
- 1. Display Remote Status Screen
- 3. Under System Settings
- 1. Display Remote Status Screen
- 1. Display Remote Status Screen
- 9. Operation
- 9.1. Testing and Programming Detonators
- 9.2. Reprogramming Bench Box(es)
- 9.3. Blast RF Mode
- 9.4. Exit the blast sequence without firing (disarming)
- 9.5. Permanent Abort
- 9.6. Programming Errors before Arming
- 9.7. High Leakage during Arming
- 9.8. Last Det Check
- 9.9. Synchronisation Errors
- 10. Specifications
- 11. Troubleshooting Error Codes
- 12. Blast Layout
- 12.1. Unsynchronised Multiple Bench Box Blasting
- 12.2. Synchronised Multiple Bench Box Blasting
UTM-00232 | Rev 9
DetNet South Africa Copyright © 2018
Page 31 of 51
1. Remote Status Screen
The following columns are displayed:
• ID – Bench Box number and current connection status
• Dets – Number of detonators connected to Bench Box
• Mode – Powered, detonators are powered
• RF - Communication Level – Ratio of messages received to
messages sent expressed as a percentage. Minimum acceptable
level of 75 percent, anything below 60 percent could result in
communication problems between boxes when attempting a
synchronised blast.
• E – Errors detected Y(es) or N(o)
ID DETS MODE RF E
1 0 UNKNOWN N
2 0 UNKNOWN 0 N
3 0 UNKNOWN N
4 21 POWERED 10 N
TIME LEFT: 00:00:00
PRESS (1-4) FOR DETAIL
PRESS ESC TO CHANGE MENU
BAT LEVEL: 100%
BOX 4 -CONNECTED
DETCOUNT: 21
STATUS: POWERED
PROG ERROR: 0
CURRENT LIM:
BACK SCAN: OK
BOUNDARY CHECK: OK
VOLTAGE: 7V
LEAKAGE: 1.07mA
CURRENT: 1.49mA
CHANNEL: 1 2 3 4 5 6
HARNESS ERR - - - - - -
PAGE 2
BOX 4 -CONNECTED
REMOTE KEY: DISABLED
GRACE: -
UPCONV OUT: 6V
BATTERY OUT: 89%
INTERLOCKS: OFF OFF OFF
PAGE 1
BOX 4 -CONNECTED
REMOTE KEY: PRESENT
GRACE: 00:01:53
UPCONV OUT: 6V
BATTERY: 89%
INTERLOCKS: OFF OFF OFF
PAGE 1