System Description

UTM-00355 | Rev 2
Page 11 of 261
DetNet South Africa Copyright © 2022
1 USERS OF THIS MANUAL
Purpose of this manual
This manual details the operation of the DigiShot
®
Ranger System.
End User
Requirements
Only trained personnel, and personnel found competent, are allowed to operate the system.
Users of the system shall be aware of the recommended procedures for using the DigiShot
®
Ranger System
as per manufacturer’s recommendations.
These recommendations do not supersede the method as required by local mine, explosives or statutory
regulations/procedures/codes of practise regarding the use of detonators. In such cases, the MOST
STRINGENT set of rules between the mine, explosives or local regulations/procedures/codes of practise and
the manufacturer must be followed.
Training
Training and software upgrades shall only be performed by a DetNet SA subject matter expert.
Contact the DetNet head office for additional information.
A
LL
U
SERS OPERATING THE
D
IGI
S
HOT
®
R
ANGER
S
YSTEM SHALL HAVE SUCCESSFULLY COMPLETED THE
SPECIFIC TRAINING BEFORE PERFORMING ANY WORK WITH THE DEVICE
(
S
).
This manual is only to be used for the DigiShot
®
Ranger System and the applicable
software version as displayed.