System Description

UTM-00355 | Rev 2

Page 127 of 261

Assigning ViewShot Timing

1. From the Main Menu

 Press to select Assign

ViewShot.

 If Assign delays is selected after

verifying the design then the warning

will be displayed as shown

When the locations have been tagged separately, the detonators will not be ready to be connected to the Ranger.

To deploy the delays, the Tagger needs a plan (with updated delays) that matches the actual locations already

deployed.

By executing “Assign ViewShot” from the main menu, the Tagger will check every detonator recorded in the “tagged

list” against the ViewShot plan (loaded on the Tagger). If the delay in the detonator does not match the plan, the new

delay will be tagged in the detonator and the ViewShot plan will be updated with a checked mark against the matching

record.

Verify Plan

This menu option is only available for the “Planned” mode context.

2. From the Main Menu

 Press to select ViewShot

 Press to select Verify Plan.

The list of tagged detonators is compared with the actual plan. The user can view the updates in the “View Plan

“ menu. All detonators that do not match the plan are flagged in the list (Listed as new and indicated by asterisk).

Matching positions are also marked as completed, (a checked sign) if location and delay are matched and a tag

symbol if only location is matched but not the delay.

Verify Delays

Times as in the Plan correspond to detlist.

3. From the Main Menu

 Press to select ViewShot.

 Press to select Verify Delays.