System Description

UTM-00355 | Rev 2
Page 132 of 261
DetNet South Africa Copyright © 2022
5. Press + SoftKey to add to the list of hole templates
 Note that the Default hole type cannot be edited
6. Press up/down arrows to select the required List
 Press key to continue
7. Press up/down arrows to select the number of Decks
per Hole (Maximum of 6 allowed)
 Press to save
 Press  key to continue
 Use Keypad to enter Time per deck
 Press to continue to next Time
 Press to save

The detonators should be counted from the bottom of the hole up i.e. Detonator 1 is
located at the bottom of the hole or in the bottom deck by convention.