System Description

UTM-00355 | Rev 2
Page 204 of 261
DetNet South Africa Copyright © 2022
5. Check Blast Design
 Press from main Menu to view Design to view
6. Prepare for Blast
 Press button to select Arm.
7. Arm
 Press button to select Local Blast

ARM AND FIRE COMMANDS FOR DETONATORS WILL NOT INITIALLY BE KNOWN TO THE D IGI S HOT
®
R ANGER
AT POWER ON . THESE COMMANDS ARE ONLY AVAILABLE FROM THE BLASTING ( RED ) B LAST C ARD AND
WILL BE ISSUED TO THE D IGI S HOT
®
R ANGER WHEN NECESSARY , EITHER DIRECTLY FROM THE RED
B LAST C ARD ( IN CASE OF A LOCAL BLAST ) OR REMOTELY FROM THE BASE R ANGER . A RM AND FIRE
BLASTING COMMANDS WILL BE ERASED FROM THE R ANGER MEMORY AFTER USE .
8. Local Blast
 User will be prompted to Scan Key
 Scan the Red BlastCard at the back of the
DigiShot
®
Ranger
 Enter the associated PIN
 Press to continue.
 The screen will alternate between displaying awaiting high
voltage and prompting the User to press next.
 The time displayed indicates the time remaining to press
next before it ‘disarms’.
BLAST CARD NFC SENSOR