System Description

UTM-00355 | Rev 2

Page 209 of 261

12. Remote Blast

 Wait if message “Not ready yet” is displayed and when

connected to the bench the base will display Grace and

the time left for grace period to elapse

13. User will be prompted to Scan Key once all the bench Rangers are out of grace period

and ready to blast.

14. Scan Key

 Scan the RED BlastCard at the back of the DigiShot

Ranger

 Enter the corresponding PIN

 Press to continue

 Press and Hold the NEXT button on the front of the

DigiShot

Ranger for 2 seconds

 The DigiShot

Ranger will initiate

arming and a 30-second high-

voltage charging period followed

by Testing Line and the 120-

second blast window.

15. To disarm the blast

The user is also provided with an option to Arm the Ranger without the need to connect

the tagger via an AutoArm function. The AutoArm function will allow the user to scan a no

PIN yellow BlastCard and if there are no errors present; program and move to the waiting

for next press state. The user will then have to press next for 2 seconds and the unit will

then be ready to arm.