System Description

UTM-00355 | Rev 2

Page 217 of 261

36. Remote Blast

 Press and hold the NEXT button

on the front of the DigiShot

Ranger for 2 seconds

 The DigiShot

Ranger will initiate a

Grace period of 2 minutes.

37. Remote Blast

 The Bench Ranger will await a command from the Base Ranger

 Select the applicable Bench Rangers by pressing their

corresponding numbers on the keypad. Select Bench 10 by

pressing 0 on the keypad and Bench 1 by pressing 1 on the

keypad and all selected Benches will be shown as indicated

by the tick mark  .

 Applicable Bench Ranger will be Indicated by 

 Press to continue

38. Synchronized or Non–Synchronized blasting

 Press for non-synchronized

39. Remote Non-Synchronized Blast

 Wait if message “Not ready yet” is

displayed

 User will be prompted to Scan Key

once all the bench Rangers are out

of grace period and ready to blast.

 Once all the Bench Rangers are

finished with grace countdown then



Disconnect the CE4 Tagger from the Bench Ranger. CE4 Tagger will automatically

disconnect from the Bench Ranger during charging.

Connect the CE4 Tagger via Wi-Fi to the Base Ranger.