System Description

UTM-00355 | Rev 2
Page 95 of 261
DetNet South Africa Copyright © 2022
 Type the number of dets per hole and press to continue
Tag Detonators
This function enables the user to assign a position to one detonator at a time.
The position is either a combination of a side (left/right), a row number (1-63), a hole number (1-127) and detonator
number in a decked hole (1-15) OR a Special – an out-of-pattern detonator (1-255).
10.3.2.1. Tagging Screen Soft Key Options
Left / Right Mode - This function enables the user to select the
side being tagged based on the blast plan.
Select / Soft Key to toggle between Left and Right side.
The Tagger will display the selected side.
This screen will only be displayed if the option to tag on both sides was selected.
The Function key may be used to select the
required side while in the Tagging mode as
follows:
Press and hold key while pressing the /
Soft Key to toggle between Sides.
M AXIMUM OF 15 DETONATORS PER HOLE .