System Description

UTM-00355 | Rev 2

Page 97 of 261

Select Channel Function

The Function key may be used to select Channels while in the

Tagging mode, only if multiple channel mode is enabled, as

follows:

Press and hold key while pressing or key to toggle

up or down between Channels.

Test Single Det

While in the Tagging menu, the user has the option to test a single detonator (Connected

to the pogo pin connector) by pressing the minus/power key. During this test, any

detonators connected via the harness wire terminal posts will be temporarily disconnected,

and there will thus be no need to disconnect the bus-line when the Test Single Det option

is activated. This feature is permanently enabled.

Test All

While in the Tagging menu, the user has the option to test All detonators in the list, to verify that they are present.

 Press the key to test all detonators.