Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

8.3 CLEANING OF THE AIR INTAKE MANIFOLD

Clean as follows:

1. Remove loose gasket material from the cylinder head and intake manifold mating surfaces.

2. Wash all of the parts in clean fuel oil.

EYE INJURY

To avoid injury from ﬂying debris when using co mp ressed

air, wear adequate eye protection (face shield or safety

goggles) and do not exceed 276 kPa (40 psi) air pressure.

3. Blow dry with compressed air.

All information subject to change without notice.