Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

8.5 INSTALLATION OF AIR INTAKE MANIFOLD

Install a s follows:

1. Install six gaskets to the air intake manifold.

2. Install t hirteen ﬂanged screws and isolator gaskets to t he air intake manifold. Secure air

intake manifold to cylinder head. Torque the bolts to 25 N·m (18 lb·ft).

3. Re-install electrical harness connectors t o appropriate sensors.

4. Install oil coolant module. Refer to section 26.3.

5. Install fuel module. Refer to section .

6. Install cold boost pipe. Refer to section 7.4.

7. Install exhaust gas recirculation (EGR) mixer pipe and delivery pipe. Refer to section .

8. Install the poly-V-belts. Refer to section 40.3.

9. Prime fuel system. Refer to section .

10. Fill the c ooling system. Refer to OEM speciﬁcations.

All information subject to change without notice.