Workshop Manual

10.3 INSTALLATION OF THE DD13 WASTEGATE SOLENOID

Install as follows:

1. If removed, install the stud to the cylinder block boss. Torque the stud to 10 N·m (7.4 lb·ft).

2. Install the wastegate solenoid on the cylinder block.

3. Install the bolt (3) and the nut (2). Torque each to 30 N·m (22 lb·ft).

4. Install the vehicle air supply (1) to the w astegate solenoid. Torque to 25 N·m (18 lb·ft).

All information subject to change without notice.