Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

15.2 REMOVAL OF PISTON AND CONNECTING ROD ASSEMBLY

Remove the piston and connecting rod assembly as follows:

1. Drain the engine cooling system.

2. Drain the engine oil.

3. Remove the oil pan. Refer to section 19.2

4. Remove the camshaft housing and associated parts. Refer to section 3.1

5. Remove the cylinder head and gasket.

[a] For DD13 ONLY: refer to section 14.2

[b] For DD15 ONLY: refer to section 14.4

6. Use Scotch-Brite® pads to remove any carbon deposits from the upper inner surface

of the cylinder liner.

1. Carbon De posits in Cylinder Liners

All information subject to change without notice.