Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

15.5 ASSEMBLY OF PISTON AND CONNECTING ROD ASSEMBLY

Assemble as follows:

1. Using appropriate ﬂat-nosed pliers, install one of the retaining rings into a retaining ring

recess in the piston. Orient the retaining ring gap ( 1) to either the 12 o'clock or 6 o'clock

position.

2. Liberally lubricate the piston pin bore, the piston pin, and the connecting rod bushing in

the small end of the connecting rod with 80/90w oil (or equivalent).

All information subject to change without notice.