Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

16.1 DESCRIPTION AND OPERATION OF CYLINDER LINER AND RELATED

PARTS

The cylinder liners feature a “bottom stop” design, which means that the cylinder liners are

installed with a lower collar in the cylinder block. This design allows for a shorter distance

between cylinders and a more compact design for the cylinder block. Each cylinder liner has 2

sealing rings: the upper sealing ring, sealed by the upper coolant jacket to the cylinder block bore,

and the lower sealing ring, sealed by the lower coolant jacket to the cylinder block bore.

1. Cylinder Liner 5. Lower Coolant Jacket

2. Compression Seal Surface 6. Lower Co llar

3. Upper Sea ling Ring 7. Lower Sealing Ring

4. Upper Coolant Jacket 8. Bottom Stop Balcony

Figure 16-1 Cylinder Liner

All information subject to change without notice.