Workshop Manual

19.2 REMOVAL OF OIL PAN

Remove as follows:

1. Open the oil ﬁlter and cap.

2. Remove the drain plug and drain the engine oil.

3. Remove the dipstick.

4. Loosen the dipstick tube on the oil pan. Refer to section 20.2.

5. Remove bolt at harness P-clamp on front center of oil pan.

6. Loosen the eighteen oil pan bolts. Bolts will remain installed to the pan.

7. Remove the oil pan, taking care not to damage the oil pump inlet pipe and screen.

8. Remove the oil pan seal and check for damage.

All information subject to change without notice.