Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

19.3 CLEANING OF OIL PAN

Clean as follows:

1. Clean the oil pan and a ttaching hardware with clean fuel oil or solvent.

To avoid injury from ﬂying debris when using co mp ressed

air, wear adequate eye protection (face shield or safety

goggles) and do not exceed 40 psi (276 kPa) air pressure.

2. Dry with compressed air.

NOTICE:

Do not use solvents to clean gaskets. Damage to the gasket will

result.

3. Clean the surfaces the cylinder block, all four T-joints, front cover, oil pan, and ﬂywheel

housing where they mate.

All information subject to change without notice.