Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

21.3 INSPECTION OF THE OIL PUMP, OIL SUCTION MANIFOLD, AND OIL

LINES

Inspect as follows:

To avoid injury from ﬂying debris when using co mp ressed

air, wear adequate eye protection (face shield or safety

goggles) and do not exceed 40 psi (276 kPa) air pressure.

1. Wash all parts in clean fuel oil and dry them with compressed air.

2. Clean the suction and pressure pipe and screen in c lean fuel oil and blow dry with

compressed air.

All information subject to change without notice.