Workshop Manual

22.3 INSPECTION OF THE CRANKCASE BREATHER
22.3 INSPECTION OF THE CRANKCASE BREATHER
Inspect as follows:
1. Clean the gasket surface of the engine block prior to installation of crankcase breather.
2. Inspect the tubes, clamps and hoses for wear or damage; replace if necessary.
3. Inspect the crankcase breather for cracks or damage; replace if necessary.
4. Inspect the sensor and replace, if necessary.
All information subject to change without notice.
22-6 DDC-SVC-MAN-0081 201 0 Copyrig ht © 2010 DETROIT DIESEL CORPORATION