Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

[b] Remove the bolts securing the two-piece fuel injector electrical harness (1 and 3) and

remove the harness from the camshaft housing housing.

14. Remove the engine brake solenoids from the camshaft housing.

NOTICE:

Ensure when loosening the rocker shaft bolts that the bolts are

loosened from the inside bolts ou tward in 1/2 turn increments.

The increment procedure ne ed

stobefollowedtopreventthe

rocker shaft from breaking.

15. Completely loosen all

of the adjusting screws on all of the rocker arms.

16. Loosen the seven bolts securing the intake rocker shaft to the camshaft bearing caps.

NOTICE:

Make sure tha t the camshaft housing housing is not damaged

during removal of the intake/exhau st rocker shaft assemblies.

All information subject to change without notice.