Workshop Manual

2.2 REMOVAL OF CAMSHAFT AND ROCKER SHAFT/ENGINE BRAKE ASSEMBLY

17. Using Rocker Arm Lifter / Spacer tool (W470589044000) for the DD13, or Rocker Arm

Lifter / Spacer Intake tool (W470589004000) for the DD15, remove the intake rocker

shaft assembly.

NOTICE:

Ensure when loo sening the rocker shaft bolts that th e bolts are

loosened from the inside b olts outward in 1/2 turn increments.

The increment procedure needs to be followed to prevent the

rocker shaft from breaking.

18. Loosen the seven bolts securing the exhaust rocker

shaft to the camshaft caps.

19. Using Rocker Arm Lifter / Spacer Exhaust (W470589074000) for the DD13 or Rocker

Arm Lifter / Spacer Exhaust (W470589004000) for the DD15, remove the e xhaust rocker

shaft assembly. When removing the EPA10 exhau

st rocker shaft, ensure the rockers are

in the up position.

NOTE:

The engine brake s

olenoids do not have to be removed unless d amaged.

NOTE:

Mark cap position for proper reassembly.

All information subject to change without notice.