Workshop Manual

29.2 REMOVALOFTHEWATERPUMP

29.2 REMOVAL OF THE WATER PUMP

Remove as follows:

1. Drain the coolant from radiator. Refer to OEM procedures.

2. Disconnect the batteries.

3. Loosen the ﬁve bolts securing the water pump pulley to the water pump.

PERSONAL INJURY

To avoid injury to hands and ﬁngers from the spring-loaded

auto belt tension er violently snapping back, do not cut the

belt to remove it.

4. Remove the accessory drive belt. Refer to section 40.1.

5. Remove the ﬁve bolts (1) securing the coolant pulley (2) to the water pump (4); and

remove pulley from water pump.

6. Remove nine bolts (3) from the water pump and remove from the oil coolant module (6).

All information subject to change without notice.