Workshop Manual

30.3 INSPECTION OF COOLANT THERMOSTAT AND SEAL

30.3 INSPECTION OF COOLANT THERMOSTAT A ND SEAL

Inspect thermostat as follows:

1. Visually inspect all parts for wear or damage.

[a] If wear or damage is found, replace parts.

[b] If wear or damage is not found, reuse parts.

2. Visually inspect thermostat body seal for damage, cracks or nicks.

[a] If any damage is noted, r eplace seal.

[b] If no damage is found, reuse parts.

3. Visually inspect the tip of the thermostat for wear or damage.

[a] If wear or damage is found, replace parts.

[b] If wear or damage is not found, reuse parts.

All information subject to change without notice.