Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE
31.3 INSTALLATION OF THE COOLANT FILTER
Install a s follows:
1. Install a new O-ring (2) onto the cap.
2. Install a new coolant filter (3) into the cap (1).
3. Install coolant filter and cap into the oil coolant module (4). Torque cap to 55-60 N·m
(41-44 lb·ft).
All information subject to change without notice.
DDC-SVC-MAN-0081 20 10 Copyright © 2010 DETROIT DIESEL CORPORAT ION 31-5