Workshop Manual

32.2 INSTALLATION OF COOLANT FILTER SERVICE MODULE

Install as follows:

1. Install new O-rings and seals. Lubricate with clean coolant.

2. Install Coolant Filter Service Module on the oil cooler module.

3. Install the ten bolts and torque to 37 N·m (27 lb·ft).

4. Install hoses and hose clamps.

5. Fill co

olant to appropriate level.

ENGIN

E E XH AUST

To avoid injury from inhaling engine exhaust, always

opera

te the engine in a well-ventilated area. Engine

exhaust is toxic.

6. Star

t engine and check for leaks.

All information subject to change without notice.