Workshop Manual

33.2 INSTALLATION OF THE COOLA NT INLET ELBOW

33.2 INSTALLATION OF THE COOLANT INLET ELBOW

Install as follows:

1. Install new O-ring.

2. Install the coolant inlet elbow to the coolant ﬁlter service module with two bolts.

3. Torque bolts to 30 N·m (22 lb·ft).

4. Fill coolant to appropriate level.

ENGINE EXHAUST

To avoid injury from inhaling engine exhaust, always

operate the engine in a well-ventilated area. Engine

exhaust is toxic.

5. Start engine and check for leaks.

All information subject to change without notice.