Workshop Manual

34.7 INSPECTION OF FLYWHEEL HOUSING AND REAR OIL SEAL AREA OF CRANKSHAFT
34.7 INSPECTION OF FLYWHEEL HOUSING AND REAR OIL SEAL AREA
OF CRANKSHAFT
Inspect as follows:
1. Inspect flywheel housing for cracks and any other damage.
[a] Check sealing surface for damage.
[b] Check flywheel housing for cracks.
[c] If damaged or cracked, repair is not possible; replace the part.
2. Inspect the flywheel where the rear oil seal makes contact. Check for groove in flywheel;
if grooved, replace flywheel.
All information subject to change without notice.
34-12 DDC-SVC-MAN-0081 201 0 Copyrig ht © 2010 DETROIT DIESEL CORPORATION