Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE
10. Install the 30 bolts to camshaft caps; finger tighten the bolts. Refer to figure for proper
bolt placement.
11. Using the torque sequence shown below torque the M10 camshaft cap bolts to the
following:
□ 20 N·m (15 lb·ft)
□ Then torque to 50-55 N·m (37-40 lb·ft).
All information subject to change without notice.
DDC-SVC-MAN-0081 20 10 Copyright © 2010 DETROIT DIESEL CORPORAT ION 2-19