Workshop Manual

36.2 INSTALLATION OF THE VIBRATION DAMPER

Install as follows:

1. Install the splash ring (1) with cup-side (2) toward end of crankshaft.

2. Using guide studs tool (J-43431), install the vibration damper onto the crankshaft.

3. Install the eight bolts attaching the vibration damper to the crankshaft. Torque to 200

N·m (147.5 lb·ft). Refer to section 36.2.

4. Install the poly-V-belt. Refer to section 40.3.

All information subject to change without notice.