Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

18. The dial indicator should read 0.051 - 0.257 mm (0.002 - 0.010 in). If the gear lash is

excessive between either camshaft gear and the number ﬁve idler gear, inspect the n

umber

ﬁve idler gear spindle, camshaft gear and camshaft housing. Repair as necessary.

NOTICE:

The camshaft journal area is lubricated by oil that has to travel

through the rocker shaft. If the rocker shaft is installed incorrectly,

oil passage s do not line up. This results in insufﬁcient lubrica

tion

and damage to the camshaft journals. Incorrect shaft installation

may also result in the engine brakes not functioning and cause

damage to the rocker arm bushings.

All information subject to change without notice.