Workshop Manual

39.1 DESCRIPTION AND OPERATION OF BELT DRIVE TENSIONER AND RELATED PARTS

There is a square hole in each tensioning arm to install a 1/2 in socket tool for removal and

installation of the poly-V-belts. The outer poly-V-belt must be removed before removing the

inner poly-V-belt.

1. Crankcase Damper 8. Accessory Mounting Bracket

2. Poly-V-Belt for the Fan 9. Belt Tensioner

3. Alternator

10. Fan Clutch

4. Pulley

11. Pulley and Spacer

5. Poly-V-Belt for Alte rnator, Refrigerant Compressor and Co olant Pump

12. Water Pump

6. Tensioner Pulley

13. Idler Pulley Bracket

7. Refrigerant Compressor

14. Idl er Pulley

All information subject to change without notice.