Workshop Manual

42.1 DESCRIPTION AND OPERATION OF CYLINDER BLOCK AND RELATED PARTS

1. Oil Hole s 8. Holes for Feed Gear Drive

2. Connection for Oil Pressure Sensor 9. Connection for Oil Feed to Axial Power Turbine

3. Connection for Engine Oil Temperature Sensor 10. Oil Feed Connection for Cylinder Block Ventilation

4. O il Return for Oil Filter Change 11. Oil Feed Connection Turbocharger

5. Oil Return Connection from Oil Water Heat Exchanger 12. Oil Hole

6. Oil Feed Connection to Oil Water Heat Exchanger 13. Oil Transfer Holes to the Cylinder Head

7.Oil Hole 14. Oil Return from Cylinder Head

Figure 42-4 Cylinder B lock

All information subject to change without notice.