Workshop Manual

42.2 REMO VAL AND DISASSEMBLY OF ENGINE FROM THE VE HICLE

FALLING ENGINE

To avoid injury from a falling engine, ensure the engine

is securely attached to the engine overhaul sta nd before

releasing the lifting sling.

18. Separate the engine from the transmission.

19. Remove the fuel ﬁlter module. Refer to section .

20. Remove high pressure pump. Refer to section .

21. Use engine overhaul stand (J–29109) for support when stripping an engine cylinder block.

22. Rotate engine in either direction and lock it into position.

23. Remove the inlet and outlet fuel lines connected to the Motor Control M odule (MCM), if

equipped.

24. Remove any electrical components, accessories, connectors or wiring looms from the

engine.

All information subject to change without notice.