Workshop Manual

4.1 CAMSHAFT TIMING VERIFICATION
5. Install the flywheel TDC Locating Pin (W470589001500), t hrough the crankshaft position
sensor hole in the flywheel housing and engage into the flywheel notch.
6. Install the rear Camshaft Timing Tool (W470589054000) for EPA07 DD15,
(W470589104000) for EPA10 DD15, and ( W470589034000) for DD13 (1) onto the
camshaft housing.
All information subject to change without notice.
4-4 DDC-SVC-MAN-0081 2010 Copyright © 2010 DETROIT DIESEL CORPO RATION