Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

27. Install Camshaft Timing Tool (1) (W470589054000) for EPA07 DD15 - shown,

(W470589104000) for EPA 10 DDl5, and (W470589034000) for DD13 into the holes at

the rear of the camshaft housing and secure to the camshaft housing with two bolts.

28. Install both of the intake and exhaust camshafts into the camshaft housing. Refer to section

2.4.

29. Rotate the camshafts until the mark on the inside of the gear aligns with the m ark on

Camshaft Timing Tool (W470589054000) for EPA07 DD15, (W470589104000) for

EPA10 DDl5, and (W470589034000) for DD13.

All information subject to change without notice.