Workshop Manual

5.2 ENGINE GEAR TRAIN INSTALLATION AND TIMING

30. Install Camshaft Timing Tool (1) (W470589054000) for EPA07 DD15 - shown,

(W470589104000) for EPA10 DDl5, and (W470589034000) for DD13 into the holes at the

slot in the front of the camshaft housing and secure to the camshaft housing with one bolt.

31. Ensure timing marks on the camshaft gears are at TDC and aligned to the marks on the tool.

32. Install the seven camshaft caps onto intake and exhaust camshafts.

NOTE:

The ﬁrst and seventh camshaft caps h old the engine brake so leno id to camshaft cap.

All information subject to change without notice.