Workshop Manual

EPA07/10 DD PLATFORM WORKSHOP MANUAL - ENGINE

33. Prior to engine brake solenoid installation, replace the O-rings on the engine brake

solenoids.

NOTE:

There are 30 bolts retaining the camshaft assemblies; fourteen 120 mm (M10) bo lts,

seven 108 mm (M10) bo lts and nine 63 mm (M8) bolts.

34. Install the thirty bolts to camshaft caps; ﬁnger tighten the bolts. Refer to ﬁgure for proper

bolt placement.

All information subject to change without notice.